Dell 5130 Color Laser User's Guide (PDF) - Page 247

Before Using the UX Filter Check the following items before using the UX filter. Before setting up the workstation, set up the printer as follows. 1. Make sure the lpd port is working or not when using the network environment. If the lpd port is not working, set LPD to On on the operator panel. (Mandatory) See "Protocol" for more information. When a parallel or USB port is to be used, make sure these are working. (Mandatory) 2. Set up IP address and subnet mask when the printer is used in the network environment. (Mandatory) 3. Make TBCPFilter function available if TBCPFilter function is installed on the printer. See "Adobe Protocol" for more information. Installing the UX Filter Before Installation The following are required for the installation. Supported operating system is described in "Page Description Language (PDL)/Emulation, Operating System, and Interface." Disk capacity: 20 MB of free disk space required, including temporary working space for installation. Log on as a root account to perform the operation here. If you have no root privilege, contact your system administrator. Output printer must be registered in the workstation before using UX filter. (HP-UX) Use sam command for registration of output printer. For more information, see the HP-UX related manual. Files Added by the Installation The following files will be added when the UX filter is installed. Solaris Directory File name txt2ps2 sunras2ps2 /usr/local/dellbin5130 tiff2ps2 xwd2ps2 Contents Text conversion utility SunRaster conversion utility TIFF conversion utility XWD conversion utility