Dell 5130 Color Laser User's Guide (PDF) - Page 15

Back to Contents Page Install Optional Accessories (if applicable) Installing a 550-Sheet Feeder Installing a 1100-Sheet Feeder Installing both 550-Sheet Feeders and 1100-Sheet Feeder Installing an Output Expander Installing a Memory Module Installing a Hard Disk Installing a Wireless Adapter Configuring a Wireless Adapter You can make the printer more functional by installing the optional accessories. This chapter describes how to install printer accessories such as the 550-sheet feeder and wireless adapter. Installing a 550-Sheet Feeder CAUTION: If you are adding a 550-sheet feeder after setting up the printer, be sure to turn off the printer, unplug the power cable, and disconnect all cables from the back of the printer before completing these tasks. CAUTION: When lifting the 550-sheet feeder, grasp and lift the printer as instructed on the label of the feeder. 1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer. 2. Pull out the tray until it stops. Lift the front slightly and remove it. 3. Lift the printer and align the three guide pins of the 550-sheet feeder with the holes at the bottom of the printer. Gently lower the printer onto the 550-sheet feeder.