HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 105
graceful-restart (OSPF view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Examples # Filter incoming routes using ACL 2000. system-view [Sysname] acl number 2000 [Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255 [Sysname-acl-basic-2000] quit [Sysname] ospf 100 [Sysname-ospf-100] filter-policy 2000 import # Configure ACL 3000 to permit only route 113.0.0.0/16 to pass, and reference ACL 3000 to filter incoming routes. system-view [Sysname] acl number 3000 [Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0 [Sysname-acl-adv-3000] rule 100 deny ip [Sysname-acl-adv-3000] quit [Sysname] ospf 100 [Sysname-ospf-100] filter-policy 3000 import graceful-restart (OSPF view) Syntax graceful-restart [ ietf | nonstandard ] View undo graceful-restart OSPF view Default level 2: System level Parameters ietf: Enables the IETF GR capability. nonstandard: Enables the non-IETF GR capability. Description Use graceful-restart to enable OSPF Graceful Restart capability. Use undo graceful-restart to disable OSPF Graceful Restart capability. By default, OSPF Graceful Restart capability is disabled. Enable Opaque LSA advertisement and reception with the opaque-capability enable command before enabling the IETF GR capability for OSPF. Before enabling non-IETF GR capability for OSPF, enable OSPF LLS (link local signaling) with the enable link-local-signaling command and OOB (out of band resynchronization) with the enable out-of-band-resynchronization command. If the keywords nonstandard and ietf are not specified when OSPF GR is enabled, nonstandard is the default. 94