HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 110

Description Use ispf enable to enable OSPF ISPF. Use undo ispf enable to disable OSPF ISPF. By default, OSPF ISPF is disabled. When a network topology is changed, ISPF allows the system to recomputes only the affected part of the shortest path tree (SPT), instead of the entire SPT. Examples # Enable OSPF ISPF. system-view [Sysname] ospf 100 [Sysname-ospf-100] ispf enable log-peer-change Syntax log-peer-change View undo log-peer-change OSPF view Default level 2: System level Parameters None Description Use log-peer-change to enable the logging of OSPF neighbor state changes. Use undo log-peer-change to disable the logging. The logging is enabled by default. With this feature enabled, information about neighbor state changes is displayed on the terminal until the feature is disabled. Examples # Disable the logging of neighbor state changes for OSPF process 100. system-view [Sysname] ospf 100 [Sysname-ospf-100] undo log-peer-change lsa-arrival-interval Syntax lsa-arrival-interval interval undo lsa-arrival-interval 99