HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 26

View Any view Default level 1: Monitor level Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed. verbose: Displays detailed information about both active and inactive routes. Without this keyword, only brief information about active routes is displayed. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ipv6 routing-table to display brief IPv6 routing information, including destination IP address and prefix, protocol type, priority, metric, next hop, and outbound interface. The command displays only active routes (the brief information about the current optimal routes). Use display ipv6 routing-table verbose to display detailed information about all IPv6 routes, including both active and inactive routes. The output shows the statistics of the entire routing table, and then the detailed information of each route. Examples # Display brief routing table information display ipv6 routing-table Routing Table : Public Destinations : 1 Routes : 1 Destination: ::1/128 NextHop : ::1 Interface : InLoop0 Protocol : Direct Preference: 0 Cost : 0 Table 4 Command output Field Destination NextHop Preference Interface Protocol Cost Description IPv6 address of the destination network/host Next hop address Route priority Outbound interface Routing protocol Route cost # Display detailed routing table information. 15