HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 278
silent-interface(OSPFv3 view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
Parameters router-id: 32-bit router ID, in IPv4 address format. Description Use router-id to configure the OSPFv3 router ID. Use undo router-id to remove a configured router ID. Router ID is the unique identifier of a device running an OSPFv3 process in the AS. The OSPFv3 process cannot run without a Router ID. Make sure that different processes have different Router IDs. Related commands: ospfv3. Examples # Configure the Router ID as 10.1.1.3 for OSPFv3 process 1. system-view [Sysname] ospfv3 1 [Sysname-ospfv3-1] router-id 10.1.1.3 silent-interface(OSPFv3 view) Syntax silent-interface { interface-type interface-number | all } View undo silent-interface { interface-type interface-number | all } OSPFv3 view Default level 2: System level Parameters interface-type interface-number: Specifies an interface by its type and number. all: Specifies all interfaces. Description Use silent-interface to disable the specified interface from receiving and sending OSPFv3 packets. Use undo silent-interface to restore the default. An interface is able to receive and send OSPFv3 packets by default. Examples # Disable an interface from receiving and sending OSPFv3 packets in OSPFv3 processes 100 and 200. system-view [Sysname] ospfv3 100 [Sysname-ospfv3-100] router-id 10.110.1.9 [Sysname-ospfv3-100] silent-interface vlan-interface 10 [Sysname-ospfv3-100] quit [Sysname] ospfv3 200 [Sysname-ospfv3-200] router-id 20.18.0.7 267