HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 202
peer reflect-client (BGP/BGP-VPN instance view), peer route-limit (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
# In BGP-VPN instance view, carry no private AS number in BGP updates sent to the peer group test. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test public-as-only peer reflect-client (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } reflect-client View undo peer { group-name | ip-address } reflect-client BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a string of 1 to 47 characters. ip-address: IP address of a peer. Description Use peer reflect-client to configure the router as a route reflector and specify a peer/peer group as a client. Use undo peer reflect-client to remove the configuration. By default, neither the route reflector nor the client is configured. Related commands: reflect between-clients and reflect cluster-id. Examples # In BGP view, configure the local device as a route reflector and specify the IBGP peer group test as a client. system-view [Sysname] bgp 100 [Sysname-bgp] peer test reflect-client # In BGP-VPN instance view, configure the local device as a route reflector and specify the IBGP peer group test as a client. (vpn1 must have been created.) system-view [Sysname] bgp 109 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test reflect-client peer route-limit (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } route-limit prefix-number [ { alert-only | reconnect reconnect-time } | percentage-value ] * 191