HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 146
default ipv4-unicast, default local-preference (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
default ipv4-unicast Syntax default ipv4-unicast View undo default ipv4-unicast BGP view Default level 2: System level Parameters None Description Use default ipv4-unicast to enable the default use of IPv4 unicast address family for the peers that are established using the peer as-number command. Use undo default ipv4-unicast to disable the default use of IPv4 unicast address family for the peers that are established using the peer as-number command. The use of IPv4 unicast address family is enabled by default. The default ipv4-unicast or undo default ipv4-unicast command applies to only BGP peers that are established after it is executed. The default ipv4-unicast or undo default ipv4-unicast command applies to only BGP peers that are established using the peer as-number command. After executing the undo default ipv4-unicast command, you can use the peer enable command to enable the use of IPv4 address family for a peer. Examples # Enable the default use of IPv4 unicast address family for the peers that are established using the peer as-number command. system-view [Sysname] bgp 100 [Sysname-bgp] default ipv4-unicast default local-preference (BGP/BGP-VPN instance view) Syntax default local-preference value View undo default local-preference BGP view, BGP-VPN instance view Default level 2: System level 135