HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 193
peer fake-as (BGP/BGP-VPN instance view), peer filter-policy (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
peer fake-as (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } fake-as as-number View undo peer { group-name | ip-address } fake-as BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a string of 1 to 47 characters. ip-address: IP address of a peer. as-number: Local autonomous system number, in the range of 1 to 4294967295. Description Use peer fake-as to configure a fake local AS number for a peer or peer group. Use undo peer fake-as to remove the configuration. By default, no fake local AS number is configured for a peer or peer group. NOTE: The peer fake-as command is only applicable to an EBGP peer or peer group. Examples # In BGP view, configure a fake AS number of 200 for the peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] peer test fake-as 200 # In BGP-VPN instance view, configure a fake AS number of 200 for the peer group test. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test fake-as 200 peer filter-policy (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } filter-policy acl-number { export | import } View undo peer { group-name | ip-address } filter-policy [ acl-number ] { export | import } BGP view, BGP-VPN instance view 182