HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 235
ripng summary-address, timers
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
If both the poison reverse and split horizon functions are enabled, only the poison reverse function takes effect. Examples # Enable the split horizon function on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ripng split-horizon ripng summary-address Syntax ripng summary-address ipv6-address prefix-length View undo ripng summary-address ipv6-address prefix-length Interface view Default level 2: System level Parameters ipv6-address: Destination IPv6 address of the summary route. prefix-length: Prefix length of the destination IPv6 address of the summary route, in the range of 0 to 128. It indicates the number of consecutive 1s of the prefix, which defines the network ID. Description Use ripng summary-address to configure a summary network to be advertised through the interface. Use undo ripng summary-address to remove the summary. Networks falling into the summary network will not be advertised. The cost of the summary route is the lowest cost among summarized routes. Examples # Assign an IPv6 address with the 64-bit prefix to VLAN-interface 100 and configure a summary with the 35-bit prefix length. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 address 2001:200::3EFF:FE11:6770/64 [Sysname-Vlan-interface100] ripng summary-address 2001:200:: 35 timers Syntax timers { garbage-collect garbage-collect-value | suppress suppress-value | timeout timeout-value | update update-value } * View undo timers { garbage-collect | suppress | timeout | update } * RIPng view 224