HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 371
if-match ipv6
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
Field Denied Index Permit ::/1 ge Le Description Number of routes not satisfying the match criterion Index number of the prefix list Match mode of the item: permit or deny IPv6 address and prefix length for matching greater-equal, the lower prefix length less-equal, the upper prefix length if-match ipv6 Syntax if-match ipv6 { address | next-hop | route-source } { acl acl6-number | prefix-list ipv6-prefix-name } View undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ] Routing policy view Default level 2: System level Parameters address: Matches the destination address of IPv6 routing information. next-hop: Matches the next hop of IPv6 routing information. route-source: Matches the source address of IPv6 routing information. acl acl6-number: Specifies the number of an IPv6 ACL for filtering, in the range of 2000 to 3999 for address, and 2000 to 2999 for next-hop and route-source. prefix-list ipv6-prefix-name: Specifies the name of a IPv6 prefix list for filtering, a string of 1 to 19 characters. Description Use if-match ipv6 to configure a destination, next hop or source address based match criterion for IPv6 routes. Use undo if-match ipv6 to remove the match criterion. The match criterion is not configured by default. Examples # Configure node 10 of routing policy policy1 to permit routing information whose next hop address matches IPv6 prefix list p1. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy] if-match ipv6 next-hop prefix-list p1 360