HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 220

Parameters cost: Default metric of redistributed routes, in the range of 0 to 16. Description Use default cost to specify the default metric of redistributed routes. Use undo default cost to restore the default. The default metric of redistributed routes is 0. The specified default metric applies to the routes redistributed by the import-route command with no metric specified. Related commands: import-route. Examples # Set the default metric of redistributed routes to 2. system-view [Sysname] ripng 100 [Sysname-ripng-100] default cost 2 display ripng Syntax View display ripng [ process-id ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters process-id: RIPng process ID, in the range of 1 to 65535. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ripng to display the running status and configuration information of a RIPng process. If no process-id is specified, information about all RIPng processes is displayed. Examples # Display the running status and configuration information of all configured RIPng processes. display ripng RIPng process : 1 Preference : 100 Checkzero : Enabled 209