HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 399
routing-table limit, vpn-instance-capability simple
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
routing-table limit Syntax routing-table limit number { warn-threshold | simply-alert } View undo routing-table limit VPN instance view Default level 2: System level Parameters number: Maximum number of routes for the VPN instance to support. The value ranges from 1 to 12288. warn-threshold: Specifies a threshold for warning, in the range of 1 to 100, in percentages. When the percentage of the number of existing routes to the maximum number of routes supported exceeds the specified threshold, the system gives an alarm message but still allows new routes. If the number of routes in the VPN instance reaches the maximum supported, no more routes are added. simply-alert: Specifies that when the number of routes exceeds the maximum number of routes supported, the system still accepts routes but generates a system log (Syslog) message. Description Use routing-table limit to limit the maximum number of routes in a VPN instance, preventing too many routes from being accepted by a PE. Use undo routing-table limit to restore the default. By default, no limit is configured. Examples # Specify that VPN instance vpn1 supports up to 1000 routes and can receive new routes after the number of existing routes exceeds the limit. system-view [Sysname] ip vpn-instance vpn1 [Sysname-vpn-instance-vpn1] route-distinguisher 100:1 [Sysname-vpn-instance-vpn1] routing-table limit 1000 simply-alert vpn-instance-capability simple Syntax vpn-instance-capability simple View undo vpn-instance-capability OSPF multi-instance view Default level 2: System level Parameters None 388