HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 25
display ipv6 routing-table, Default level, Parameters, Description, Examples, Syntax
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Default level 1: Monitor level Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ip routing-table statistics to display the route statistics of the routing table. Examples # Display route statistics in the routing table. display ip routing-table statistics Proto route active added DIRECT 24 4 25 STATIC 4 1 4 RIP 0 0 0 OSPF 0 0 0 BGP 0 0 0 Total 28 5 29 deleted 1 0 0 0 0 1 freed 0 0 0 0 0 0 Table 3 Command output Field Proto route active added deleted freed Total Description Origin of the routes Number of routes from the origin Number of active routes from the origin Number of routes added into the routing table since the router started up or the routing table was last cleared Number of routes marked as deleted, which will be freed after a period Number of routes that got freed (got removed permanently) Total number display ipv6 routing-table Syntax display ipv6 routing-table [ vpn-instance vpn-instance-name ] [ verbose ] [ | { begin | exclude | include } regular-expression ] 14