HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 41
display rip
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
display rip Syntax View display rip [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters process-id: RIP process ID, in the range of 1 to 65535. If no process ID is specified, information about all configured RIP processes is displayed. vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display rip to display the current status and configuration information of the specified RIP process. Examples # Display the current status and configuration information of all configured RIP processes. display rip Public VPN-instance name : RIP process : 1 RIP version : 1 Preference : 100 Checkzero : Enabled Default-cost : 0 Summary : Enabled Hostroutes : Enabled Maximum number of balanced paths : 8 Update time : 30 sec(s) Timeout time : Suppress time : 120 sec(s) Garbage-collect time : update output delay : 20(ms) output count : 3 TRIP retransmit time : 5 sec(s) TRIP response packets retransmit count : 36 Silent interfaces : None Default routes : Only Default route cost : 3 Verify-source : Enabled 180 sec(s) 120 sec(s) 30