HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 31
display ipv6 routing-table protocol
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Default level 1: Monitor level Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed. ipv6-prefix-name: Specifies the name of the IPv6 prefix list, in the range of 1 to 19 characters. verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief active routing information is displayed. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ipv6 routing-table ipv6-prefix to display routes permitted by the IPv6 prefix list. Examples # Display brief active routing information permitted by the IPv6 prefix list test2. display ipv6 routing-table ipv6-prefix test2 Routes Matched by Prefix list test2 : Summary Count : 1 Destination: 100::/64 NextHop : :: Interface : NULL0 For command output, see Table 4. Protocol : Static Preference: 60 Cost : 0 display ipv6 routing-table protocol Syntax display ipv6 routing-table [ vpn-instance vpn-instance-name ] protocol protocol [ inactive | verbose ] [ | { begin | exclude | include } regular-expression ] View Any view Default level 1: Monitor level Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed. protocol: Displays routes of a routing protocol, which can be bgp4+, direct, ospfv3, ripng, and static. inactive: Displays only inactive routes. Without this keyword, all active and inactive routes are displayed. 20