HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 150

Field type Maximum allowed prefix number Threshold Configured hold timer value Keepalive timer value Minimum time between advertisement runs Peer Preferred Value No routing policy is configured Members Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State Description Type of the BGP peer group: IBGP or EBGP Maximum prefixes allowed to receive from the peer group Percentage of received prefixes from the peer group to maximum prefixes allowed to receive from the peer group; If the percentage is reached, the system generates alarm messages. Holdtime interval Keepalive interval Minimum interval for route advertisements Preferred value specified for the routes from the peer No routing policy is configured. Detailed information of the members in the peer group IPv4 address of the peer BGP version running on the peer AS number of the peer Number of messages received Number of messages sent Number of messages to be sent Number of prefixes received Lasting time of the session/Lasting time of the current state (when no session is established) State machine state of the peer display bgp network Syntax View display bgp network [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. 139