HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 324
peer ebgp-max-hop (IPv6 address family view), peer enable (IPv6 address family view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 324 highlights
peer ebgp-max-hop (IPv6 address family view) Syntax peer { ipv6-group-name | ipv6-address } ebgp-max-hop [ hop-count ] View undo peer { ipv6-group-name | ipv6-address } ebgp-max-hop IPv6 address family view Default level 2: System level Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. ipv6-address: IPv6 address of a peer. hop-count: Maximum hop count, in the range of 1 to 255. By default, the value is 64. Description Use peer ebgp-max-hop to allow establishing the EBGP connection to a peer/peer group indirectly connected. Use undo peer ebgp-max-hop to remove the configuration. By default, this feature is disabled. You can use the argument hop-count to specify the maximum router hops of the EBGP connection. Examples # Allow establishing the EBGP connection with the peer group test on an indirectly connected network. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] group test external [Sysname-bgp-af-ipv6] peer test ebgp-max-hop peer enable (IPv6 address family view) Syntax peer { ipv4-group-name | ipv4-address | ipv6-address } enable View undo peer { ipv4-group-name | ipv4-address | ipv6-address } enable IPv6 address family view Default level 2: System level Parameters ipv4-group-name: Name of an IPv4 peer group, a string of 1 to 47 characters. The IPv4 peer group should be created beforehand. ipv4-address: IPv4 address of a peer. 313