HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 40

Description Use default cost to configure the default metric for redistributed routes. Use undo default cost to restore the default. By default, the default metric of redistributed routes is 0. When you use the import-route command to redistribute routes from other protocols without specifying a metric, the metric specified by the default cost command applies. Related command: import-route. Examples # Configure the default metric for redistributed routes as 3. system-view [Sysname] rip 100 [Sysname-rip-100] default cost 3 default-route Syntax default-route { only | originate } [ cost cost ] View undo default-route RIP view Default level 2: System level Parameters only: Advertises only a default route. originate: Advertises both a default route and other routes. cost: Cost of the default route, in the range of 1 to 15. The default is 1. Description Use default-route to configure all the interfaces under the RIP process to advertise a default route with the specified metric to RIP neighbors. Use undo default-route to disable all the interfaces under the RIP process from sending a default route. By default, no default route is sent to RIP neighbors. The RIP router with this feature configured will not receive any default routes from RIP neighbors. Related commands: rip default-route. Examples # Configure all the interfaces under RIP process 100 to send only a default route with a metric of 2 to RIP neighbors. system-view [Sysname] rip 100 [Sysname-rip-100] default-route only cost 2 29