HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 294
Table 69, Command output, If no parameter specified
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
Description Use display bgp ipv6 peer to display peer/peer group information. If no parameter specified, information about all peers and peer groups is displayed. Examples # Display all IPv6 peer information. display bgp ipv6 peer BGP local router ID : 192.168.1.40 Local AS number : 100 Total number of peers : 1 Peers in established state : 0 Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State 2001::1 100 0 0 0 0 00:02:02 Active Table 69 Command output Field BGP local router ID Local AS number Total number of peers Peers in established state Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State Description Local router ID Local AS number Total number of BGP peers Number of established BGP peers IPv6 address of the peer AS number Messages received Messages sent Messages to be sent Number of prefixes received Lasting time of a session/Lasting time of present state (when no session is established) Peer state # Display the detailed information of IPv6 peer 1::1. display bgp ipv6 peer 1::1 verbose BGP Peer is 1::1, remote AS 100, Type: EBGP link BGP version 4, remote router ID 45.1.1.1 BGP current state: Established, Up for 00h01m34s BGP current event: KATimerExpired BGP last state: OpenConfirm Port: Local - 1031 Remote - 179 Configured: Active Hold Time: 180 sec Keepalive Time: 60 sec Received : Active Hold Time: 180 sec 283