HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 335
peer route-update-interval (IPv6 address family view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Default level 2: System level Parameters group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. ipv4-address: IPv4 address of a peer. ipv6-address: IPv6 address of a peer. route-policy-name: Name of a routing policy, a string of 1 to 63 characters. import: Applies the routing policy to routes from the peer (group). export: Applies the routing policy to routes sent to the peer (group). Description Use peer route-policy to apply a routing policy to routes incoming from or outgoing to a peer or peer group. Use undo peer route-policy to remove the configuration. By default, no routing policy is specified for the peer (group). The peer route-policy command does not use the if-match interface clause defined in the routing policy. See "Routing policy configuration commands" for related information. Examples # Apply the routing policy test-policy to routes received from the peer group test. system-view [Sysname] route-policy test-policy permit node 10 [Sysname-route-policy] if-match cost 10 [Sysname-route-policy] apply cost 65535 [Sysname-route-policy] quit [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] group test external [Sysname-bgp-af-ipv6] peer test route-policy test-policy import [Sysname-route-policy] if-match cost 10 [Sysname-route-policy] apply cost 65535 [Sysname-route-policy] quit [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-ipv6] peer 2001::1 route-policy test-policy import peer route-update-interval (IPv6 address family view) Syntax peer { ipv6-group-name | ipv6-address } route-update-interval interval View undo peer { ipv6-group-name | ipv6-address } route-update-interval IPv6 address family view 324