HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 353

Description Use continue to specify the next node of the routing policy to be matched. Use undo continue to remove the configuration. By default, no next routing policy node is specified. The node number specified must be larger that the current node number. Example # Create routing policy policy1 with node 10, and specify the match mode as permit. Specify the number of the next routing policy node to be matched as 20. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy] continue 20 display ip as-path Syntax View display ip as-path [ as-path-number ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters as-path-number: AS path list number, in the range of 1 to 256. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ip as-path to display BGP AS path list information. Information about all BGP AS path lists will be displayed if no as-path-number is specified. Related commands: ip as-path, if-match as-path, and apply as-path. Examples # Display the information of BGP AS path list 1. display ip as-path 1 ListID Mode Expression 1 permit 2 342