HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 74
default-route-advertise (OSPF view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Description Use default-cost to configure a cost for the default route advertised to the stub or NSSA area. Use undo default-cost to restore the default value. The cost defaults to 1. This command is only applicable to the ABR of a stub area or the ABR/ASBR of an NSSA area. Related commands: stub and nssa. Examples # Configure Area 1 as a stub area, and specify the cost of the default route advertised to the stub area as 20. system-view [Sysname] ospf 100 [Sysname-ospf-100] area 1 [Sysname-ospf-100-area-0.0.0.1] stub [Sysname-ospf-100-area-0.0.0.1] default-cost 20 default-route-advertise (OSPF view) Syntax default-route-advertise [ [ [ always | permit-calculate-other ] | cost cost | route-policy route-policy-name | type type ] * | summary cost cost ] View undo default-route-advertise OSPF view Default level 2: System level Parameters always: Generates a default route in a Type-5 LSA into the OSPF routing domain regardless of whether there is a default route in the routing table. If this keyword is not specified, the router generates a default route in a Type-5 LSA into the OSPF routing domain only when an active default route that does not belong to the current OSPF process exists in the IP routing table. permit-calculate-other: Calculates default routes from other routers with this keyword specified or does not calculate default routes from other routers without this keyword specified when the router generates a default route in a Type-5 LSA into the OSPF routing domain. If the router generates no default route in a Type-5 LSA into the OSPF routing domain, the router calculates default routes from other routers regardless of whether this keyword is specified. cost cost: Specifies a cost for the default route, in the range of 0 to 16777214. If no cost is specified, the default cost specified by the default cost command applies. route-policy route-policy-name: Specifies a routing policy name, a string of 1 to 63 case-sensitive characters. When a default route exists in the routing table and the specified routing policy is matched, the command distributes a default route in a Type-5 LSA into the OSPF routing domain, and the routing policy modifies some values in the Type-5 LSA. If the always keyword is specified at the same time, the command can distribute a default route in a Type-5 LSA into the OSPF routing domain when the specified 63