HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 227
import-route, destination and prefix.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
View RIPng view Default level 2: System level Parameters acl6-number: Specifies the number of an ACL to filter incoming routing information, in the range of 2000 to 3999. ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list to filter incoming routes, in the range of 1 to 19 characters. Description Use filter-policy import to define an inbound route filtering policy. Only routes which match the filtering policy can be received. Use undo filter-policy import to disable inbound route filtering. By default, RIPng does not filter incoming routing information. If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the ACL should be configured with the rule [ rule-id ] { deny | permit } ipv6 source sour sour-prefix command to deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny | permit } ipv6 source sour sour-prefix destination dest dest-prefix command to deny/permit a route with the specified destination and prefix. The source keyword specifies the destination address of a route and the destination keyword specifies the prefix of the route (the prefix must be valid; otherwise, the configuration is ineffective). Examples # Reference IPv6 prefix list Filter1 to filter incoming RIPng updates. system-view [Sysname] ripng 100 [Sysname-ripng-100] filter-policy ipv6-prefix Filter1 import # Configure ACL6 3000 to permit only route 2001::1/128 to pass, and reference ACL6 3000 to filter incoming RIPng updates. system-view [Sysname] acl ipv6 number 3000 [Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128 [Sysname-acl6-adv-3000] rule 100 deny ipv6 [Sysname-acl6-adv-3000] quit [Sysname] ripng 100 [Sysname-ripng-100] filter-policy 3000 import import-route Syntax import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | route-policy route-policy-name ] * undo import-route protocol [ process-id ] 216