HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 205
peer substitute-as (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
ip-address: IP address of a peer. interval: Minimum interval for sending the same update message. The range is 0 to 600 seconds. A value of 0 means to send the update message immediately. Description Use peer route-update-interval to specify the interval for sending the same update to a peer or peer group. Use undo peer route-update-interval to restore the default value. By default, the interval is 5 seconds for IBGP peers, and 30 seconds for EBGP peers. Examples # In BGP view, specify the interval for sending the same update to peer group test as 10 seconds. system-view [Sysname] bgp 100 [Sysname-bgp] peer test as-number 100 [Sysname-bgp] peer test route-update-interval 10 # In BGP-VPN instance view, specify the interval for sending the same update to peer group test as 10 seconds. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test as-number 100 [Sysname-bgp-ipv4-vpn1] peer test route-update-interval 10 peer substitute-as (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } substitute-as View undo peer { group-name | ip-address } substitute-as BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a sting of 1 to 47 characters. ip-address: IP address of a peer. Description Use peer substitute-as to replace the AS number of a peer/peer group in the AS_PATH attribute with the local AS number. Use undo peer substitute-as to remove the configuration. No AS number is replaced by default. Examples # In BGP view, substitute local AS number for AS number of peer 1.1.1.1. 194