HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 360
if-match tag, OSPF NSSA Type 2 external routes.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 360 highlights
Default level 2: System level Parameters external-type1: OSPF Type 1 external routes. external-type1or2: OSPF Type 1 or 2 external routes. external-type2: OSPF Type 2 external routes. internal: Internal routes (OSPF intra-area and inter-area routes). nssa-external-type1: OSPF NSSA Type 1 external routes. nssa-external-type1or2: OSPF NSSA Type 1 or 2 external routes. nssa-external-type2: OSPF NSSA Type 2 external routes. Description Use if-match route-type to configure a route type match criterion. Use undo if-match route-type to remove the match criterion. The match criterion is not configured by default. Examples # Configure node 10 in permit mode of routing policy policy1 to match OSPF internal routes. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy] if-match route-type internal if-match tag Syntax if-match tag value View undo if-match tag Routing policy view Default level 2: System level Parameters value: Specifies a tag from 0 to 4294967295. Description Use if-match tag to match routing information having the specified tag. Use undo if-match tag to remove the match criterion. The match criterion is not configured by default. Examples # Configure node 10 in permit mode of routing policy policy1 to permit RIP and OSPF routing information with a tag of 8. system-view 349