HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 65

• Receives RIPv1 broadcast and unicast messages, and RIPv2 broadcast, multicast, and unicast messages When RIPv2 runs on the interface in multicast mode, the interface can perform the following operations: • Sends RIPv2 multicast messages • Receives RIPv2 broadcast, multicast, and unicast messages Examples # Configure VLAN-interface 10 to broadcast RIPv2 messages. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] rip version 2 broadcast silent-interface (RIP view) Syntax silent-interface { interface-type interface-number | all } View undo silent-interface { interface-type interface-number | all } RIP view Default level 2: System level Parameters interface-type interface-number: Specifies an interface by its type and number. all: Disables all interfaces from sending routing updates. Description Use silent-interface to disable an interface or all interfaces from sending routing updates. The interface only receives but does not send RIP messages. Use undo silent-interface to restore the default. By default, all interfaces are allowed to send routing updates. Examples # Configure all VLAN interfaces to work in silent state, and activate VLAN-interface 10. system-view [Sysname] rip 100 [Sysname-rip-100] silent-interface all [Sysname-rip-100] undo silent-interface vlan-interface 10 [Sysname-rip-100] network 131.108.0.0 summary Syntax summary undo summary 54