HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 289
display bgp ipv6 group
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
View IPv6 address family view Default level 2: System level Parameters None Description Use default-route imported to enable the redistribution of default route into the IPv6 BGP routing table. Use undo default-route imported to disable the redistribution. By default, the redistribution is not enabled. Examples # Enable the redistribution of default route from OSPFv3 into IPv6 BGP. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] default-route imported [Sysname-bgp-af-ipv6] import-route ospfv3 1 display bgp ipv6 group Syntax View display bgp ipv6 group [ ipv6-group-name ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters ipv6-group-name: Peer group name, a string of 1 to 47 characters. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display bgp ipv6 group to display IPv6 peer group information. If no ipv6-group-name is specified, information about all peer groups is displayed. Examples # Display the information of the IPv6 peer group aaa. 278