HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 43

Field Configured peers Triggered updates sent Number of routes changes Number of replies to queries Description Configured neighbors. Number of sent triggered updates. Number of changed routes in the database. Number of RIP responses. display rip database Syntax View display rip process-id database [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters process-id: RIP process ID, in the range of 1 to 65535. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display rip database to display active routes in the database of the specified RIP process, which are sent in normal RIP routing updates. Examples # Display the active routes in the database of RIP process 100. display rip 100 database 10.0.0.0/8, cost 1, ClassfulSumm 10.0.0.0/24, cost 1, nexthop 10.0.0.1, Rip-interface 11.0.0.0/8, cost 1, ClassfulSumm 11.0.0.0/24, cost 1, nexthop 10.0.0.1, Imported Table 8 Command output Field X.X.X.X/X cost classful-summ Nexthop Description Destination address and subnet mask. Cost of the route. Indicates the route is a RIP summary route. Address of the next hop. 32