HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 208
reflect between-clients (BGP view/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Examples # In BGP view, configure preferences for EBGP, IBGP and local routes as 20, 20, and 200. system-view [Sysname] bgp 100 [Sysname-bgp] preference 20 20 200 # In BGP-VPN instance view, configure preferences for EBGP, IBGP and local routes as 20, 20, and 200. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] preference 20 20 200 reflect between-clients (BGP view/BGP-VPN instance view) Syntax reflect between-clients View undo reflect between-clients BGP view, BGP-VPN instance view Default level 2: System level Parameters None Description Use reflect between-clients to enable route reflection between clients. Use undo reflect between-clients to disable this function. By default, route reflection between clients is enabled. After a route reflector is configured, it reflects the routes of a client to other clients. If the clients of a route reflector are fully meshed, you need disable route reflection between clients to reduce routing costs. Related commands: reflector cluster-id and peer reflect-client. Examples # Disable route reflection between clients. system-view [Sysname] bgp 100 [Sysname-bgp] undo reflect between-clients # In BGP-VPN instance view, disable route reflection between clients. (vpn1 must have been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] undo reflect between-clients 197