HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 118

system-view [Sysname] ospf 100 [Sysname-ospf-100] area 1 [Sysname-ospf-100-area-0.0.0.1] network 131.119.0.0 0.0.255.255 [Sysname-ospf-100-area-0.0.0.1] authentication-mode md5 [Sysname-ospf-100-area-0.0.0.1] quit [Sysname-ospf-100] quit [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf authentication-mode md5 15 plain abc # Configure the network 131.119.0.0/16 in Area 1 to support simple authentication, and set for the interface the plaintext authentication password to abc. system-view [Sysname] ospf 100 [Sysname-ospf-100] area 1 [Sysname-ospf-100-area-0.0.0.1] network 131.119.0.0 0.0.255.255 [Sysname-ospf-100-area-0.0.0.1] authentication-mode simple [Sysname-ospf-100-area-0.0.0.1] quit [Sysname-ospf-100] quit [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf authentication-mode simple plain abc ospf bfd enable Syntax ospf bfd enable [ echo ] View undo ospf bfd enable Interface view Default level 2: System level Parameters echo: Configures BFD echo packet single-hop detection. If this keyword is not specified, BFD control packet bidirectional detection is enabled. Description Use ospf bfd enable to enable BFD for link failure detection on an OSPF interface. Use undo ospf bfd enable to disable BFD on an OSPF interface. By default, an OSPF interface is not enabled with BFD. Examples # Enable OSPF and BFD on VLAN-interface 11. system-view [Sysname] ospf [Sysname-ospf-1] area 0 [Sysname-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.255.255 [Sysname] interface vlan-interface 11 107