HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 70

area (OSPF view) Syntax area area-id View undo area area-id OSPF view Default level 2: System level Parameters area-id: ID of an area, which is an IP address, or a decimal integer in the range of 0 to 4294967295 that is translated into the IP address format by the system. Description Use area to create an area and enter area view. Use undo area to remove an area. No OSPF area is created by default. Examples # Create area 0 and enter area 0 view system-view [Sysname] ospf 100 [Sysname-ospf-100] area 0 [Sysname-ospf-100-area-0.0.0.0] asbr-summary Syntax asbr-summary ip-address { mask | mask-length } [ cost cost | not-advertise | tag tag ] * View undo asbr-summary ip-address { mask | mask-length } OSPF view Default level 2: System level Parameters ip-address: IP address of the summary route in dotted decimal notation. mask: Summary route mask, in dotted decimal notation. mask-length: Length of summary route mask, in the range of 0 to 32 bits. cost cost: Specifies the cost of the summary route, in the range of 1 to 16777214. For Type-1 external routes, the cost defaults to the largest cost among routes that are summarized. For Type-2 external routes, the cost defaults to the largest cost among routes that are summarized plus 1. 59