HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 52

[Sysname-rip-1] default cost 3 # Redistribute OSPF routes with the cost being the default cost. [Sysname-rip-1] import-route ospf maximum load-balancing (RIP view) Syntax maximum load-balancing number View undo maximum load-balancing RIP view Default level 2: System level Parameters number: Maximum number of ECMP routes , in the range of 1 to 8. Description Use maximum load-balancing to specify the maximum number of ECMP routes. Use undo maximum load-balancing to restore the default. By default, the maximum number of ECMP routes is 8. Examples # Specify the maximum number of ECMP routes as 2. system-view [Sysname] rip [Sysname-rip-1] maximum load-balancing 2 network Syntax network network-address undo network network-address View RIP view Default level 2: System level Parameters network-address: IP address of a network segment, which can be the IP network address of any interface. Description Use network to enable RIP on the interface attached to the specified network. Use undo network to disable RIP on the interface attached to the specified network. RIP is disabled on an interface by default. 41