HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 204
peer route-update-interval (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
View BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a string of 1 to 47 characters. ip-address: IP address of a peer. route-policy-name: Routing policy name, a case-sensitive string of 1 to 63 characters. export: Applies the routing policy to routes outgoing to the peer (or peer group). import: Applies the routing policy to routes incoming from the peer (or peer group). Description Use peer route-policy to apply a routing policy to routes incoming from or outgoing to a peer or peer group. Use undo peer route-policy to remove the configuration. By default, no routing policy is applied to routes from/to the peer/peer group. The peer route-policy command does not apply the if-match interface clause in the referenced routing policy. See "Routing policy configuration commands" for related commands. Examples # In BGP view, apply routing policy test-policy to routes outgoing to the peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] peer test route-policy test-policy export # In BGP-VPN instance view, apply the routing policy test-policy to routes outgoing to the peer group test. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test route-policy test-policy export peer route-update-interval (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } route-update-interval interval View undo peer { group-name | ip-address } route-update-interval BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a sting of 1 to 47 characters. 193