HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 254

Description Use display ospfv3 peer statistics to display information about all OSPFv3 neighbors on the router-numbers of neighbors in different states. Examples # Display information about all OSPFv3 neighbors. display ospfv3 peer statistics OSPFv3 Router with ID (1.1.1.1) (Process 1) Neighbor Statistics Area ID Down Init 2-way ExStar Exchange Loading Full 0.0.0.0 0 0 0 0 0 0 1 Total 0 0 0 0 0 0 1 Table 55 Command output Field Area ID Down Init 2-Way ExStart Exchange Loading Full Total Description Area ID. In this state, neighbor initial state, the router has not received any information from a neighboring router for a period of time. In this state, the device received a Hello packet from the neighbor but the packet contains no Router ID of the neighbor. Mutual communication is not setup. Indicates mutual communication between the router and its neighbor is available. DR/BDR election is finished under this state (or higher). In this state, the router decides on the initial DD sequence number and master/slave relationship of the two parties. In this state, the router exchanges DD packets with the neighbor. In this state, the router sends LSRs to request the neighbor for needed LSAs. Indicates LSDB synchronization has been accomplished between neighbors. Total number of neighbors under the same state. display ospfv3 request-list Syntax View display ospfv3 [ process-id ] request-list [ { external | inter-prefix | inter-router | intra-prefix | link | network | router | grace } [ link-state-id ] [ originate-router ip-address ] | statistics ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters process-id: OSPFv3 process ID, in the range of 1 to 65535. 243