HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 112
lsdb-overflow-limit, maximum load-balancing (OSPF view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Use undo lsa-generation-interval to restore the default. By default, the maximum interval is 5 seconds, the minimum interval is 0 milliseconds, and the incremental interval is 5000 milliseconds.. With this command configured, when network changes are not frequent, LSAs are generated at the initial-interval. If network changes become frequent, LSA generation interval is incremented by a specified value each time a generation happens, up to the maximum-interval. Related commands: lsa-arrival-interval. Examples # Configure the maximum LSA generation interval as 2 seconds, minimum interval as 100 milliseconds and incremental interval as 100 milliseconds. system-view [Sysname] ospf 100 [Sysname-ospf-100] lsa-generation-interval 2 100 100 lsdb-overflow-limit Syntax lsdb-overflow-limit number View undo lsdb-overflow-limit OSPF view Default level 2: System level Parameters number: Specifies the upper limit of external LSAs in the LSDB, in the range of 1 to 1000000. Description Use lsdb-overflow-limit to specify the upper limit of external LSAs in the LSDB. Use undo lsdb-overflow-limit to restore the default. External LSAs in the LSDB are not limited by default. Examples # Specify the upper limit of external LSAs as 400000. system-view [Sysname] ospf 100 [Sysname-ospf-100] lsdb-overflow-limit 400000 maximum load-balancing (OSPF view) Syntax maximum load-balancing maximum undo maximum load-balancing 101