HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 394
peer allow-as-loop
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
View undo ipv4-family vpn-instance vpn-instance-name BGP view Default level 2: System level Parameters vpn-instance vpn-instance-name: Associates a VPN instance with an IPv4 address family and enters BGP VPN instance view. The vpn-instance-name argument specifies the VPN instance name, a case-sensitive string of 1 to 31 characters. Description Use ipv4-family vpn-instance to enter BGP-VPN instance view. Use undo ipv4-family vpn-instance to remove all the configurations performed in the view. Before entering BGP VPN instance view, make sure the corresponding VPN instance is created. Examples # Enter BGP-VPN instance view. system-view [Sysname] bgp 100 [Sysname] ipv4-family vpn-instance vpn1 [Sysname-bgp-vpn1] peer allow-as-loop Syntax peer { group-name | ip-address } allow-as-loop [ number ] View undo peer { group-name | ip-address } allow-as-loop BGP-VPN instance view Default level 2: System level Parameters group-name: Name of the peer group, a string of 1 to 47 characters. ip-address: IP address of the peer. number: Maximum number that the local AS number can appear repeatedly in the AS-PATH attribute. It ranges from 1 to 10 and defaults to 1. Description Use peer allow-as-loop to allow the local AS number to appear in the AS-PATH attribute of a received route and to set the allowed maximum number of repetitions. Use undo peer allow-as-loop to remove the configuration. 383