HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 272
ospfv3 mtu-ignore, ospfv3 network-type
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
ospfv3 mtu-ignore Syntax ospfv3 mtu-ignore [ instance instance-id ] View undo ospfv3 mtu-ignore [ instance instance-id ] Interface view Default level 2: System level Parameters instance-id: Instance ID, in the range of 0 to 255, which defaults to 0. Description Use ospfv3 mtu-ignore to configure an interface to ignore MTU check during DD packet exchange. Use undo ospfv3 mtu-ignore to restore the default. By default, an interface performs MTU check during DD packet exchange. A neighbor relationship can be established only if the interface's MTU is the same as that of the peer. Examples # Configure an interface that belongs to instance 1 to ignore MTU check during DD packet exchange. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospfv3 mtu-ignore instance 1 ospfv3 network-type Syntax ospfv3 network-type { broadcast | nbma | p2mp [ non-broadcast ] | p2p } [ instance instance-id ] View undo ospfv3 network-type [ broadcast | nbma | p2mp [ non-broadcast ] | p2p ] [ instance instance-id ] Interface view Default level 2: System level Parameters broadcast: Specifies the network type as Broadcast. nbma: Specifies the network type as NBMA. p2mp: Specifies the network type as P2MP. p2p: Specifies the network type as P2P. non-broadcast: Specifies the interface to send packets in unicast mode. By default, an OSPFv3 interface whose network type is P2MP sends packets in multicast mode. instance-id: The instance ID of an interface, in the range of 0 to 255, which defaults to 0. 261