HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 51
import-route (RIP view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
import-route (RIP view) Syntax import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | route-policy route-policy-name | tag tag ] * View undo import-route protocol [ process-id | all-processes ] RIP view Default level 2: System level Parameters protocol: Specifies a routing protocol from which to redistribute routes. It can be bgp, direct, ospf, rip, or static. process-id: Process ID, in the range of 1 to 65535. The default is 1. It is available only when the protocol is rip, or ospf. all-processes: Enables route redistribution from all the processes of a protocol. This keyword takes effect only when the protocol is rip, or ospf. allow-ibgp: When the protocol argument is set to bgp, allow-ibgp is an optional keyword. cost: Cost for redistributed routes, in the range of 0 to 16. If cost is not specified, the default cost specified by the default cost command applies. tag: Tag marking redistributed routes, in the range of 0 to 65,535. The default is 0. route-policy route-policy-name: Specifies a routing policy with 1 to 63 case-sensitive characters. Description Use import-route to enable route redistribution from another routing protocol. Use undo import-route to disable route redistribution. By default, RIP does not redistribute routes from other routing protocols. The import-route bgp command only redistributes eBGP routes. The import-route bgp allow-ibgp command additionally redistributes iBGP routes, which may cause routing loops. Only active routes can be redistributed. Use the display ip routing-table protocol command to display route state information. The undo import-route protocol all-processes command cancels the configuration made by the import-route protocol all-processes command, rather than the import-route protocol process-id command. Related commands: default cost. Examples # Redistribute static routes, and set the cost to 4. system-view [Sysname] rip 1 [Sysname-rip-1] import-route static cost 4 # Configure the default cost for redistributed routes as 3. 40