HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 400
vpn-target, Uses the specified VPN targets as export targets.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 400 highlights
Description Use vpn-instance-capability simple to disable routing loop detection for a VPN OSPF process. Use undo vpn-instance-capability to restore the default. By default, the loop detection function is enabled for a VPN OSPF process. Examples # Disable routing loop detecton for the VPN OSPF process 100. system-view [Sysname] ospf 100 vpn-instance vpna [Sysname-ospf-100] vpn-instance-capability simple vpn-target Syntax vpn-target vpn-target& [ both | export-extcommunity | import-extcommunity ] View undo vpn-target { all | vpn-target& [ both | export-extcommunity | import-extcommunity ] } VPN instance view Default level 2: System level Parameters vpn-target&: Adds VPN target extended community attributes to the import VPN target extended community attribute list (Import Target) or export VPN target extended community attribute list (Export Target). & means that you can add up to eight VPN targets. A VPN target attribute can be a string of 3 to 21 characters in one the following formats: • 16-bit AS number:32-bit user-defined number. For example, 101:3. • 32-bit IP address:16-bit user-defined number. For example, 192.168.122.15:1. • 32-bit AS number:16-bit user-defined number, where the AS number must not be less than 65536. For example, 65536:1. both: Uses the specified VPN targets as both import targets and export targets. The both keyword is also used when you do not specify any of both, export-extcommunity, and import-extcommunity. export-extcommunity: Uses the specified VPN targets as export targets. import-extcommunity: Uses the specified VPN targets as import targets. all: Removes all VPN targets. Description Use vpn-target to configure VPN targets for a VPN instance. Use undo vpn-target to remove the specified or all VPN targets of a VPN instance. By default, no VPN targets are configured for a VPN instance. You must configure VPN targets when creating a VPN instance. Examples # Configure VPN targets for VPN instance vpn1. 389