HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 210

Parameters ip-address: Soft-resets the BGP connection to a peer. all: Soft-resets all BGP connections. group-name: Soft-resets connections to a peer group, name of which is a sting of 1 to 47 characters. external: EBGP connection. internal: IBGP connection. export: Outbound soft reset. import: Inbound soft reset. Description Use refresh bgp to perform soft reset on specified BGP connections. Using this function can refresh the BGP routing table without tearing down BGP connections and apply a newly configured routing policy. To perform BGP soft reset, all routers in the network must support route-refresh. If a router not supporting route-refresh exists in the network, you need to configure the peer keep-all-routes command to save all routing updates before performing soft reset. Examples # Perform inbound BGP soft reset. refresh bgp all import reset bgp Syntax View reset bgp { as-number | ip-address [ flap-info ] | all | external | group group-name | internal } User view Default level 1: Monitor level Parameters as-number: Resets BGP connections to peers in the AS. ip-address: Specifies the IP address of a peer with which to reset the connection. flap-info: Clears route flap information. all: Resets all BGP connections. external: Resets all the EBGP connections. group group-name: Resets connections with the specified BGP peer group. internal: Resets all the IBGP connections. Description Use reset bgp to reset specified BGP connections. Examples # Reset all the BGP connections. reset bgp all 199