HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 392
import route-policy, ip binding vpn-instance
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 392 highlights
Only routes that survive the filtering are added into the BGP routing table. Examples # Configure BGP to filter received routes using ACL 2255. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-vpn1] filter-policy 2255 import import route-policy Syntax import route-policy route-policy View undo import route-policy VPN instance view Default level 2: System level Parameters route-policy: Name of the import routing policy for the VPN instance, a string of 1 to 63 characters. Description Use import route-policy to apply an import routing policy to a VPN instance. Use undo import route-policy to remove the application. By default, all routes permitted by the import target attribute are accepted. You can specify an import routing policy when the route redistribution control provided by the extended community attributes is not enough. An import routing policy may deny routes that are permitted by the import target attributes. Examples # Apply import routing policy poly-1 to VPN instance vpn1. system-view [Sysname] ip vpn-instance vpn1 [Sysname-vpn-instance-vpn1] import route-policy poly-1 ip binding vpn-instance Syntax ip binding vpn-instance vpn-instance-name View undo ip binding vpn-instance vpn-instance-name VLAN interface view, tunnel interface view Default level 2: System level 381