HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 174

graceful-restart timer wait-for-rib Syntax graceful-restart timer wait-for-rib timer View undo graceful-restart timer wait-for-rib BGP view Default level 2: System level Parameters timer: Time to wait for the End-of-RIB marker, in the range of 3 to 300 seconds. Description Use graceful-restart timer wait-for-rib to configure the time to wait for the End-of-RIB marker. Use undo graceful-restart timer wait-for-rib to restore the default. By default, the time to wait for the End-of-RIB marker is 180 seconds. After a BGP session has been successfully (re)established, the End-of-RIB marker must be received within the time specified with this command. Using this command can speed up route convergence. Before configuring this command, you must enable the BGP Graceful Restart capability. Related commands: graceful-restart. Examples # Set the time to wait for the End-of-RIB marker to 100 seconds. system-view [Sysname] bgp 100 [Sysname-bgp] graceful-restart timer wait-for-rib 100 group (BGP/BGP-VPN instance view) Syntax group group-name [ external | internal ] View undo group group-name BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a string of 1 to 47 characters. external: Creates an EBGP peer group, which can be the group of another sub AS in a confederation. internal: Creates an IBGP peer group. 163