HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 76
display ospf abr-asbr
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Use of this command is only for the identification of an OSPF process or area. The description has no special meaning. Examples # Describe OSPF process 100 as abc. system-view [Sysname] ospf 100 [Sysname-ospf-100] description abc # Describe OSPF area 0 as bone area. system-view [Sysname] ospf 100 [Sysname-ospf-100] area 0 [Sysname-ospf-100-area-0.0.0.0] description bone area display ospf abr-asbr Syntax View display ospf [ process-id ] abr-asbr [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters process-id: OSPF process ID, in the range of 1 to 65535. Use this argument to display information about the routes to the ABR/ASBR under the specified OSPF process. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ospf abr-asbr to display information about the routes to OSPF ABR/ASBR. If you use this command on routers in a stub area, no ASBR information is displayed. Examples # Display information about the routes to the OSPF ABR and ASBR. display ospf abr-asbr OSPF Process 1 with Router ID 192.168.1.2 Routing Table to ABR and ASBR Type Inter Destination 3.3.3.3 Area 0.0.0.0 Cost Nexthop 3124 10.1.1.2 65 RtType ASBR