HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 270

ospfv3 area Syntax ospfv3 process-id area area-id [ instance instance-id ] View undo ospfv3 process-id area area-id [ instance instance-id ] Interface view Default level 2: System level Parameters process-id: OSPFv3 process ID, in the range of 1 to 65535. area-id: Area ID, a decimal integer (in the range of 0 to 4294967295) that is translated into IPv4 address format by the system or an IPv4 address. instance-id: Instance ID of an interface, in the range of 0 to 255. The default is 0. Description Use ospfv3 area to enable an OSPFv3 process on the interface and specify the area for the interface. Use undo ospfv3 area to disable an OSPFv3 process. OSPFv3 is not enabled on an interface by default. Examples # Enable OSPFv3 process 1 on an interface that belongs to instance 1 and specify area 1 for the interface. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospfv3 1 area 1 instance 1 ospfv3 cost Syntax ospfv3 cost value [ instance instance-id ] View undo ospfv3 cost [ value ] [ instance instance-id ] Interface view Default level 2: System level Parameters value: OSPFv3 cost, in the range of 0 to 65535 for a loopback interface and 1 to 65535 for other interfaces. instance-id: Instance ID of an interface, in the range of 0 to 255, which defaults to 0. 259