HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 217

IPv6 static routing configuration commands The term "router" in this chapter refers to both routers and Layer 3 switches. delete ipv6 static-routes all Syntax View delete ipv6 static-routes all System view Default level 2: System level Parameters None. Description Use delete ipv6 static-routes all to delete all static routes including the default route. When using this command, you will be prompted whether to continue the deletion and only after you confirm the deletion will the static routes be deleted. Related commands: ipv6 route-static and display ipv6 routing-table. Examples # Delete all IPv6 static routes. system-view [Sysname] delete ipv6 static-routes all This will erase all ipv6 static routes and their configurations, you must reconfigure all static routes Are you sure?[Y/N]Y ipv6 route-static Syntax ipv6 route-static ipv6-address prefix-length { interface-type interface-number [ next-hop-address ] | next-hop-address } [ preference preference-value ] View undo ipv6 route-static ipv6-address prefix-length [ interface-type interface-number [ next-hop-address ] | next-hop-address ] [ preference preference-value ] System view Default level 2: System level 206