HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 198
peer next-hop-local (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
View BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a string of 1 to 47 characters. ip-address: IP address of a peer. Description Use peer log-change to enable the logging of session state and event information for a specified peer or peer group. Use undo peer log-change to remove the configuration. The logging is enabled by default. Examples # In BGP view, enable the logging of session state and event information for peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] peer test log-change # In BGP-VPN instance view, enable the logging of session state and event information for peer group test. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test log-change peer next-hop-local (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } next-hop-local View undo peer { group-name | ip-address } next-hop-local BGP view /BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a string of 1 to 47 characters. ip-address: IP address of a peer. Description Use peer next-hop-local to specify the router as the next hop for routes sent to a peer/peer group. Use undo peer next-hop-local to remove the configuration. 187