HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 125

ospf timer retransmit Syntax ospf timer retransmit interval View undo ospf timer retransmit Interface view Default level 2: System level Parameters interval: LSA retransmission interval in seconds, in the range of 1 to 3600. Description Use ospf timer retransmit to set the LSA retransmission interval on an interface. Use undo ospf timer retransmit to restore the default. The interval defaults to 5s. After sending an LSA, an interface waits for an acknowledgement packet. If the interface receives no acknowledgement within the retransmission interval, it will retransmit the LSA. The retransmission interval should not be so small to avoid unnecessary retransmissions. Examples # Set the LSA retransmission interval to 8 seconds. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf timer retransmit 8 ospf trans-delay Syntax ospf trans-delay seconds View undo ospf trans-delay Interface view Default level 2: System level Parameters seconds: LSA transmission delay in seconds, in the range of 1 to 3600. Description Use ospf trans-delay to set the LSA transmission delay on an interface. Use undo ospf trans-delay to restore the default. The LSA transmission delay defaults to 1 second. 114