HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 233

Default level 2: System level Parameters value: Additional metric for received routes, in the range of 0 to 16. Description Use ripng metricin to specify an additional metric for received RIPng routes. Use undo ripng metricin to restore the default. By default, the additional metric to received routes is 0. Related commands: ripng metricout. Examples # Specify the additional routing metric as 12 for RIPng routes received by VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ripng metricin 12 ripng metricout Syntax ripng metricout value View undo ripng metricout Interface view Default level 2: System level Parameters value: Additional metric to advertised routes, in the range of 1 to 16. Description Use ripng metricout to configure an additional metric for RIPng routes advertised by an interface. Use undo rip metricout to restore the default. The default additional routing metric is 1. Related commands: ripng metricin. Examples # Set the additional metric to 12 for routes advertised by VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ripng metricout 12 222