HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 114

network (OSPF area view) Syntax network ip-address wildcard-mask View undo network ip-address wildcard-mask OSPF area view Default level 2: System level Parameters ip-address: IP address of a network. wildcard-mask: Wildcard mask of the IP address. For example, the wildcard mask of mask 255.0.0.0 is 0.255.255.255. Description Use network to enable OSPF on the interface attached to the specified network in the area. Use undo network to disable OSPF for the interface attached to the specified network in the area. By default, an interface neither belongs to any area nor runs OSPF. You can configure one or multiple interfaces in an area to run OSPF. The interface's primary IP address must fall into the specified network segment to make the interface run OSPF. If only the interface's secondary IP address falls into the network segment, the interface cannot run OSPF. Related commands: ospf. Examples # Specify the interface whose primary IP address falls into 131.108.20.0/24 to run OSPF in Area 2. system-view [Sysname] ospf 100 [Sysname-ospf-100] area 2 [Sysname-ospf-100-area-0.0.0.2] network 131.108.20.0 0.0.0.255 nssa Syntax nssa [ default-route-advertise | no-import-route | no-summary | translate-always | translator-stability-interval value ] * View undo nssa OSPF area view Default level 2: System level 103